Furniture restoration in the city Austin, TX does not have to be done by stripping. Here is an easier alternative that also preserves the coating and appeal of previous finish. The wood piece will be the same as it was originally. When your item is old and broken, do not throw it away. Here are tips on furniture restoration Austin.
Wiping on mineral spirits will help you determine the next step. This works to give you an insight on how the furniture looks like with just but a coat of clear finish. Do thorough cleaning as a first step to restore the wood-piece. The recommended agent for cleaning is a mixture of water and dish soap made from liquid ivory. This should be in the same proportion as in dish washing. The process of cleaning involves gently scrubbing the furniture surface using a sponge dipped into the solution and squeezed off the extra solution. Carvings and molded parts are better cleaned using a paint brush.
White rings can be removed by using petroleum jelly. Special removers can be used too. The petroleum jelly is slathered on the ring and allowed to sit for a night. Oil from the jelly penetrates the finish removing the ring or making it less pronounced.
Remove the paint without destroying the finish. You can make a paint scraper from razor and masking tape. Firstly, cover the coat of masking tape round the edges of the blade and curve the blade faintly. Fill the damaged part with epoxy. When epoxy is mixed completely, press it in the place that is to be repaired and if you find out that there is a lost veneer, fragmented wood or destroyed molding, fix it with epoxy.
After the epoxy has hardened; this could take several hours, you can now sand and tinge the repair. The repair is blended onto the surrounding surface through gel stain painting which matches color and design. Select two stain colors matching bright and obscure wood areas. A dab of both is put on a wood scrap creating various color ranges by unifying the two.
The gel is then worked onto the surface and the excess wiped off. Note that this gel does not completely remove water stains or obscure bad effects but rather just make fine scratches less visible and add color to the worn out areas of the finish.
Small cracks or nail holes are filled with fill sticks of wax that are colored. Repair sticks made of wax or fills of pencil can also be used. Small dents can be done away with through wetting. The moisture from the wetting makes the crumbled wood to swell back to its former shape.
The ultimate step in this process is wiping on a finishing coat. This is done to restore sheen and also for protection of the surface. Any wipe done on the finish works.
Wiping on mineral spirits will help you determine the next step. This works to give you an insight on how the furniture looks like with just but a coat of clear finish. Do thorough cleaning as a first step to restore the wood-piece. The recommended agent for cleaning is a mixture of water and dish soap made from liquid ivory. This should be in the same proportion as in dish washing. The process of cleaning involves gently scrubbing the furniture surface using a sponge dipped into the solution and squeezed off the extra solution. Carvings and molded parts are better cleaned using a paint brush.
White rings can be removed by using petroleum jelly. Special removers can be used too. The petroleum jelly is slathered on the ring and allowed to sit for a night. Oil from the jelly penetrates the finish removing the ring or making it less pronounced.
Remove the paint without destroying the finish. You can make a paint scraper from razor and masking tape. Firstly, cover the coat of masking tape round the edges of the blade and curve the blade faintly. Fill the damaged part with epoxy. When epoxy is mixed completely, press it in the place that is to be repaired and if you find out that there is a lost veneer, fragmented wood or destroyed molding, fix it with epoxy.
After the epoxy has hardened; this could take several hours, you can now sand and tinge the repair. The repair is blended onto the surrounding surface through gel stain painting which matches color and design. Select two stain colors matching bright and obscure wood areas. A dab of both is put on a wood scrap creating various color ranges by unifying the two.
The gel is then worked onto the surface and the excess wiped off. Note that this gel does not completely remove water stains or obscure bad effects but rather just make fine scratches less visible and add color to the worn out areas of the finish.
Small cracks or nail holes are filled with fill sticks of wax that are colored. Repair sticks made of wax or fills of pencil can also be used. Small dents can be done away with through wetting. The moisture from the wetting makes the crumbled wood to swell back to its former shape.
The ultimate step in this process is wiping on a finishing coat. This is done to restore sheen and also for protection of the surface. Any wipe done on the finish works.
About the Author:
You can get a brief summary of the factors to consider when picking a furniture restoration Austin company at http://www.leatherfixaustin.com right now.
No comments:
Post a Comment