The major part of Earth is covered with water. These can be oceans or seas. Below them are various species that are waiting to be discovered. Aside from the living creatures, there are more treasure beneath its floor. Researchers have found out that huge basin of oil reserves and even gas can be unlocked in it.
If you are not familiar with hydraulic fracturing, this is the penetration on the underground to extract oil and even different kinds of gas. Its usually done in freshwater but as the technology gets better, they have tried seawater hydraulic fracturing. Advanced countries have been doing wide research regarding this method.
The major process of hydraulic fracturing is done to get all the necessary oils and gas in the great deep. This will need huge machinery to reach the bottom of the reserve. The pressure to be exerted must be high to keep the elements flowing. For other countries such as Saudi Arabia, this process are taken care well.
For the oil industry, this has been done as the industrial age starts to boom. In fact, with the modern day, this is still done. The only difference is new and more advanced technology are used to perform its task and secure the safety of the people. This method is done to get some fuels and other forms of oil. After the extraction, they are filtered many times to be used with the common people.
The gas industry can also benefit from it. The gas that are extracted underground are usually flammable so extra care is needed. This process is more complicated than the oils. This must be tight and secure since there are not visible with peoples naked eye. Because of these factors, engineers do this in areas wherein theres no people living on it.
The good thing of having it in seawater is very evident. This will help the people to conserve more water since the freshwater will be used to other important things such as drinking and even washing. When contamination would also occur, the salinity of water can just counterfeit the damages. Its indeed a great place to do it.
While there are advantages to it, some people wont still consider this as the best method. The first reason is because of too much effort that needs to be done. As a matter of fact, they need to calculate all the chemicals used since they are dealing with salinity. The pH level should be balanced and other equipment should be resistant to it.
Another reason is the cost. This kind of process will be more expensive compared to the freshwater method. Because the equipment must be in high quality, the cost will be greater. The chemicals will also be in demand. In the long run, it will not suitable to do with just the extraction process. The value of the labor might be more than the value of profit from it.
After knowing all these things, it would be proper to balance everything. For now, the method in seawater is a bit hard and would really need further studies. If it will be 5 years from now, there will be a big tendency that everything will look simple and fast since the technology is getting better each day.
If you are not familiar with hydraulic fracturing, this is the penetration on the underground to extract oil and even different kinds of gas. Its usually done in freshwater but as the technology gets better, they have tried seawater hydraulic fracturing. Advanced countries have been doing wide research regarding this method.
The major process of hydraulic fracturing is done to get all the necessary oils and gas in the great deep. This will need huge machinery to reach the bottom of the reserve. The pressure to be exerted must be high to keep the elements flowing. For other countries such as Saudi Arabia, this process are taken care well.
For the oil industry, this has been done as the industrial age starts to boom. In fact, with the modern day, this is still done. The only difference is new and more advanced technology are used to perform its task and secure the safety of the people. This method is done to get some fuels and other forms of oil. After the extraction, they are filtered many times to be used with the common people.
The gas industry can also benefit from it. The gas that are extracted underground are usually flammable so extra care is needed. This process is more complicated than the oils. This must be tight and secure since there are not visible with peoples naked eye. Because of these factors, engineers do this in areas wherein theres no people living on it.
The good thing of having it in seawater is very evident. This will help the people to conserve more water since the freshwater will be used to other important things such as drinking and even washing. When contamination would also occur, the salinity of water can just counterfeit the damages. Its indeed a great place to do it.
While there are advantages to it, some people wont still consider this as the best method. The first reason is because of too much effort that needs to be done. As a matter of fact, they need to calculate all the chemicals used since they are dealing with salinity. The pH level should be balanced and other equipment should be resistant to it.
Another reason is the cost. This kind of process will be more expensive compared to the freshwater method. Because the equipment must be in high quality, the cost will be greater. The chemicals will also be in demand. In the long run, it will not suitable to do with just the extraction process. The value of the labor might be more than the value of profit from it.
After knowing all these things, it would be proper to balance everything. For now, the method in seawater is a bit hard and would really need further studies. If it will be 5 years from now, there will be a big tendency that everything will look simple and fast since the technology is getting better each day.
About the Author:
You can visit seawatertechnologies.com for more helpful information about How Possible Is Seawater Hydraulic Fracturing.
No comments:
Post a Comment