Dry ice blasting is a special technique of blasting which utilizes carbon dioxide gas that is in solid form. In order for the gas to change to solid form, it is put under low temperature and high pressure. There are three main aspects to the cleaning process. These are sublimation, extreme temperature change and kinetic energy. When one needs Dry Ice Blasting Pittsburgh offers the perfect location to visit.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
People prefer using dry ice over other kinds of abrasives for several reasons. To begin with, dry ice is not toxic. This means that this abrasive does not cause any form of pollution to the environment. Since the material used in this form of cleaning does not cause pollution, it has been approved for usage by EPA in the US.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
Using this cleaning technique has been associated with a number of safety concerns. One of the concerns is that the pellets used in cleaning are normally propelled at a high velocity. As such, they are dangerous to animals and human beings. The general rule is to not point the gun at surfaces which are not being cleaned. Also, the gun ought not to be pointed to animals and humans.
A number of companies render these service to the public. It is therefore easy to find a company to employ for this activities. Different service companies offer services of different quality and also charge different costs for their services. One should therefore put in consideration prior to making their choices on which company to work with.
The process in which solid carbon (IV) oxide gas changes to gaseous form directly without first turning to liquid is referred to as sublimation. This is a very important factor in this kind of cleaning operation since it makes sure that no waste residue is formed at the cleaning site due to the abrasive. Dry ice, which is solid carbon dioxide, is used in form of pellets.
People prefer using dry ice over other kinds of abrasives for several reasons. To begin with, dry ice is not toxic. This means that this abrasive does not cause any form of pollution to the environment. Since the material used in this form of cleaning does not cause pollution, it has been approved for usage by EPA in the US.
Another advantage associated with this kind of method is that dry ice is not an abrasive material. This implies that during the cleaning process, the dry ice does not cause damages to the surface. In addition, dry ice is a non-conductive material. All this qualities coupled together, means that there is no secondary waste produced and hence can make this method more costly.
The nature of this method allows it be used in cleaning equipment while the equipment is still in use. For this reason labor, time, and costs are reduced. The method also provides high efficiency which results to increased efficiency in industrial operations. Equipment and the system should be kept clean so as to reduce the frequency and severity of failure. By doing this, system down times is also reduced.
This method is usually associated with some changes in temperature of the target surface. Mostly, there is a drop in the temperature of the target surface. However, the drop in temperature is usually low and the body can always return to room temperature after only a few minutes. The surface area of the surface that is being cleaned and the amount of dry ice used per minute usually determine temperature change observed.
Using this cleaning technique has been associated with a number of safety concerns. One of the concerns is that the pellets used in cleaning are normally propelled at a high velocity. As such, they are dangerous to animals and human beings. The general rule is to not point the gun at surfaces which are not being cleaned. Also, the gun ought not to be pointed to animals and humans.
A number of companies render these service to the public. It is therefore easy to find a company to employ for this activities. Different service companies offer services of different quality and also charge different costs for their services. One should therefore put in consideration prior to making their choices on which company to work with.
About the Author:
You can find a list of the benefits and advantages of using professional dry ice blasting Pittsburgh services at http://www.asmenvironmental.com right now.
No comments:
Post a Comment